instead of terminating the whole status bar when an error occurs, just
show a (truncated) error for that single widget.
this should also enable auto-recovery if the module returns to a "good"
state, but that hasn't been tested yet.
see #221 and #222
Use generic interval mechanism in most of the modules that use slow
updates.
Only exception: getcrypto, as the interval is specified in seconds there
and I want to retain backwards-compatibility.
fixes#220
Add a generic mechanism to set a specific interval (in minutes, as this
is primarily intended for modules that want to "slow down" updates).
This gives *all* modules the parameter "interval" and allows each module
to set the default interval using the method "interval(<value>) in the
module constructor.
see #220
In order to use symbol files, symbol.json needs to be created manually
now.
Also, remove symbol usage from the prepackaged themes to avoid
breakage.
fixes#216
Redshift might block when no network connectivity is available (if it
tries to determine the location automatically). To avoid this blocking
the whole status line, immediately release the lock in the query thread.
Theme writers are now able to use FontAwesome names and IDs instead of
the symbols itself!
The implementation itself is *slightly* hacky and might get improved in
the future: Upon the first start, a YAML file containing the FontAwesome
symbols is fetched from
https://raw.githubusercontent.com/FortAwesome/Font-Awesome/master/src/icons.yml
Note: This is only done once - to retrigger this (i.e. for an update),
please just delete the file and restart bumblebee-status.
Then, in the *icon* theme itself, you can use ${<name or id>} instead of
the actual symbol.
Names and IDs can be found here:
http://fontawesome.io/cheatsheet/
(simply remove the "fa-" prefix)
An example is provided in themes/icons/awesome-fonts.json.
(finally) fixes#20
sorry for taking so long :)
Move updating of redshift information into a separate thread so that
errors like missing network connectivity do not block the whole status
bar.
fixes#61
List themes only once, even if they are present multiple times in
different locations.
(Yes, I know that list(set(result)) would do the same, but here, I'd
like to not waste memory and be a bit faster).
see #203
Finally fix the datetime import errors by renaming the bumblebee
datetime module (*bad* idea from the start).
Apologies to everyone for whom it now breaks.
This modules makes it very easy to create shortcuts as widgets, for which the user can define the command to be executed when left clicking on it. It supports single or multiple shortcuts
* This module only updates some information on the screen when a new
display is added/removed, hence it makes sense to update it only when
the i3-bar is refreshed.
Add a new parameter engine.workspacewrap (default to true) that, if set
to false, makes the workspace change via mouse wheel stop when hitting
the first/last workspace of an output (identical to how i3wm bar itself
behaves).
fixes#188
Add a parameter that allows the user to enable/disable workspace
scrolling via the status bar.
By default, scrolling is enabled, to disable it, add the following
parameter to your bumblebee-status invokation:
-p <other parameters> engine.workspacewheel=false
see #188
After listening to an audio stream for longer than 10 minutes "mpc -f "tag artist %artist%\ntag title %title%"" will start producing lines with slightly different separation, which caused the bar to fail.
In a theme file, it is now possible to provide an array of "color
definitions", which allow you to use names instead of colors throughout
the theme file.
Currently, only the colorset "wal" is supported, which reads all colors
from the wal JSON file (~/.cache/wal/colors.json) and makes them usable
in the theme (as "foreground", "background", "cursor", "color12", etc.).
An example of this can be found in the theme wal-powerline.
see #185
This file has no actionable code when executed directly from a shell. It contains only a `class` as it is a bumblebee module.
so the shebang should be removed.
On intel pstate drivers only the normal frequency is written to /proc/cpuinfo, not accounting for scaling/turbo.
This should fix that, though it needs testing on other computers (AMD, intel without pstate) because I am not
certain that the file only exists on Intel pstate.
In order to do that, change the theme engine so that a theme can
override settings in the iconsets. Was probably a bug to begin with that
this was not possible.
In python2, filter returned a list, but in python3 it returns an iterator. So
we wrap this in a list() so that it works in both. We also want to count the
unread notifications, so this should be reflected in the code.
Override sys.stdout and sys.stderr in an attempt to enforce utf-8
encoding. Probably this will cause all kinds of weird issues down the
line, but at least, it seems to solve the immediate issue.
fixes#176
Replace textwrap.shorten() with custom implementation, since it is only
available since Python 3.4. While at it, catch i3 exceptions in order to
make unit tests (hopefully) run through.
Also, Updated README.md
see #174
The "base" currency can now be configured using the parameter "source",
and the "symbols" to be resolved can be configured using the parameter
"destination", which is a comma-separated list.
see #169
If a callback command cannot be executed, do not terminate the whole
bar. Furthermore, if such a failure occurs, try to fall back to a
globally (i.e. non widget-specific) command, so that callbacks
registered in the engine itself (such as mouse-wheel scrolling) still
function properly.
fixes#166
* A module can override the method "hidden" to specify when all it's
widgets should be hidden.
* Implement hidden for cmus and spotify
* Fix problem that cmus widgets were not displayed correctly
fixes#157
was having some problems with the current implementation as i have multiple values with the same name in sensors -u.
this way it is unambiguous and *should* just work everywhere with no lm_sensors required, though some distros might move the pseudo file elsewhere, not sure, but thats why it is configurable.
testing would be great.
also, the file is simpler too.
If a configuration parameter is *not* specified with -p on the
commandline, look for a INI style configuration file as fallback in
~/.bumblebee-status.conf or ~/.config/bumblebee-status.conf.
Section must be "module-parameters", like this:
[module-parameters]
github.token=<your github token>
fixes#138
The module now creates a widget for each battery device it detects and
shows the status for each of them (I don't know of anyone with more than
a single battery, but if I'm overhauling the module anyhow, might as
well do it comprehensively).
fixes#117
If the current volume and mute status cannot be retrieved, the most
likely explanation is that the pulseaudio daemon is not running.
Automatically start it in such a case.
Also, add a parameter "autostart" to the pulseaudio module to disable
this behaviour in case it causes issues.
see #108
This Module Displays the Status, Song, Artist and Time of the current song played or paused in mocp.
Clicking the Modules toggles play/pause.
I'm no programmer so alteration and feedback is welcome.
Best regards, Chrugi
If data cannot be retrieved for some reason (be pretty generous about
that by catching generic exceptions), instead of terminating the whole
status bar, simply report unknown data.
see #110
Since the module requires the pulseaudio daemon to be running, in order
to query system information such as the default source/sink and the
current volume, start the daemon, if necessary.
fixes#108
A previous commit broke the traffic module by deleting widgets during
each iteration. This is fatal as the widgets contain the traffic
information from the previous iteration, for delta calculation.
Store previous traffic data in the module itself instead.
In order to (hopefully) achieve localization independence, switch from
using pactl for retrieving pulseaudio information to pacmd, which seems
to be unaffected by the LANG environment variable.
fixes#103
To avoid "stray" devices being kept in the list, empty the widgets list
during each iteration and re-populate it from the list of available
interfaces.
fixes#101
The optional parameter "states" can now be used to filter which
interfaces to display. "^" can be used for negation.
For example, to only show "up" interfaces:
-p traffic.states=up
To show all interfaces not in "down" state:
-p traffic.states=^down
fixes#98
psutil.cpu_percent() only outputs to one decimal place anyway, so the trailing 0 is useless.
The prepended 0 is also not important, will only be not 0 at 100% utilization, so why not let it be 100% then and take up one less column otherwise?
No change to default behaviour, but adds boolean to only display used rather than used, total and percentage.
To only show used memory:
-p memory.usedonly=1
OK - I admit it: Mostly for the benefit of Travis and automated testing,
which complains about the DBusException, move to a more generic
exception.
However, this is probably a good idea anyhow, because independently of
the error, setting the song to an empty string is probably the best bet.
Allow the user to filter the state of devices that should be displayed.
It's possible to use both white- and blacklists (and combinations).
For example, to only show devices in state "up":
-p nic.states=up
To only show devices that are not down:
-p nic.states=^down
fixes#84
For modules that use aliases, until now, *only* the alias theme was
considered. This is typically a bad idea (tm), as the "generic" case is
that of a module theme (e.g. "disk", not that of a theme per instance of
the module (i.e. "home", "root", etc.)).
Therefore, introduce the concept of a "class" theme that can be
optionall overridden by a specific module theme.
As a pleasant side-effect, this should bring back the disk icons for all
instances of the disk module :)
fixes#79
If a module defines a callback for a widget's text, an optional
decorator "@bumblebee.output.scrollable" can be used to make the text
scrollable.
In those cases, the desired width is set to (in decreasing order of
priority):
1. whatever the widget defines as "theme.width"
2. whatever the theme defines as "width" for the module
3. whatever the commandline parameter "width" for the module is set to
4. 30 (determined by unfair dice roll)
see #27
Added theme-options ("minwidth" and "align") for setting the minimum
width and the alignment of a widget.
Also, allow widget to provide defaults for the theme options by setting
an attribute in their store called "theme-<name of the theme option>".
For example, a widget can now define a default alignment by using:
widget.set("theme-align", "default-value").
Set the minimum width for uplink and downlink widgets to "down 1000MB",
which should be plenty, and change alignment to right (personally, I
find this looks nicer).
To not have the icons on the left side "jump around" depending on the
value, make them suffixes.
If this solution is not sufficient, alternatively, the widget itself
could perform value padding. In that case, the whole alignment and
min-width settings would be obsolete and the icons could remain on the
left side.
Added theme-options ("minwidth" and "align") for setting the minimum
width and the alignment of a widget.
Also, allow widget to provide defaults for the theme options by setting
an attribute in their store called "theme-<name of the theme option>".
For example, a widget can now define a default alignment by using:
widget.set("theme-align", "default-value").
* use psutil instead of "ifconfig" in order to avoid external command
calls
* fix a small bug in the ascii theme (missing colon)
* show statistics per-nic
* If an exception is thrown, catch it and show a (somewhat) nice error
message in the i3bar instead of the normal content
* Add a flag "-d" for debugging into a debug log. Currently, this only
logs commandline calls as they occur and their return values, as well
as exceptions.
fixes#58
Until now, manually specifying an interval did not work, as a cast to
float was missing. Now, it's possible to specify an update interval in
seconds via "-p interval=<interval>"
fixes#54
Seems like subprocess and friends (Popen, communicate) are not so easy
to mock cleanly. Therefore, start from scratch and carefully write test
by test, until (at least) the old test coverage has been restored.
Instead of executing an external call to "uname", use the standard
Python module "platform" to retrieve information about the kernel used.
Positive side-effect: This is portable, if i3 ever exists on Windows :P
Since requests works the same for python2.7 and python3.x, use requests
instead of urllib (which returns a string in python2.7, but byte data in
python3.0, at least).
* Use app-specific API key for bumblebee-status
* Add some parameters (location, unit, update interval)
* Make interval calculation based on time, not number of calls
Somehow, the fix in the previous commit didn't work, it seems that
sometimes epoll() doesn't trigger, even if there is more data in
sys.stdin. I'm sure I'm doing something horribly wrong here.
Anyhow, as a quick fix, check for the open bracket to be sure to not
buffer the first event too long.
Re-enable the possibility to define custom mouse actions by binding
commands to "<alias|module>.<left-click|right-click|...>". These
commands are then executed as shell commands.
fixes#30
