84 lines
2 KiB
C++
84 lines
2 KiB
C++
// door status on arduino
|
|
// arduino is Duemilanove
|
|
// sensor is a reed sensor
|
|
|
|
const int REED_SWITCH_INPUT_PIN = 13;
|
|
|
|
const int RED_LED_OUTPUT_PIN = 12;
|
|
const int YELLOW_LED_OUTPUT_PIN = 11;
|
|
const int GREEN_LED_OUTPUT_PIN = 10;
|
|
|
|
const int DELAY_TIME = 1000;
|
|
|
|
const int MAX_COUNTER = 20;
|
|
const int LOWER_THRESHOLD = 4;
|
|
const int UPPER_THRESHOLD = MAX_COUNTER - LOWER_THRESHOLD;
|
|
|
|
const int CLOSED_DOOR = 1;
|
|
const int OPEN_DOOR = 0;
|
|
|
|
int measured_state_counter = MAX_COUNTER / 2;
|
|
int published_state = OPEN_DOOR;
|
|
|
|
void setup(){
|
|
Serial.begin(9600);
|
|
|
|
pinMode(REED_SWITCH_INPUT_PIN, INPUT);
|
|
|
|
pinMode(RED_LED_OUTPUT_PIN, OUTPUT);
|
|
pinMode(YELLOW_LED_OUTPUT_PIN, OUTPUT);
|
|
pinMode(GREEN_LED_OUTPUT_PIN, OUTPUT);
|
|
}
|
|
|
|
void loop(){
|
|
print_state();
|
|
|
|
update_measured_state_counter();
|
|
|
|
update_published_state();
|
|
|
|
delay(DELAY_TIME);
|
|
|
|
update_led_pins();
|
|
}
|
|
|
|
void print_state() {
|
|
Serial.print(" ");
|
|
Serial.print(published_state);
|
|
Serial.print(" ");
|
|
Serial.println(measured_state_counter);
|
|
}
|
|
|
|
void update_measured_state_counter() {
|
|
if(LOW == digitalRead(REED_SWITCH_INPUT_PIN)) {
|
|
measured_state_counter = max(0, measured_state_counter - 1);
|
|
} else {
|
|
measured_state_counter = min(THRESHOLD, measured_state_counter + 1);
|
|
}
|
|
}
|
|
|
|
void update_published_state() {
|
|
// status check if we can switch the status.
|
|
// low pass prevents waggling a bit
|
|
if (measured_state_counter > UPPER_THRESHOLD) {
|
|
published_state = CLOSED_DOOR;
|
|
} else if (measured_state_counter < LOWER_THRESHOLD) {
|
|
published_state = OPEN_DOOR;
|
|
}
|
|
}
|
|
|
|
void update_led_pins() {
|
|
if (published_state == CLOSED_DOOR) {
|
|
digitalWrite(RED_LED_OUTPUT_PIN, HIGH);
|
|
digitalWrite(GREEN_LED_OUTPUT_PIN, LOW);
|
|
} else if (published_state == OPEN_DOOR) {
|
|
digitalWrite(RED_LED_OUTPUT_PIN, LOW);
|
|
digitalWrite(GREEN_LED_OUTPUT_PIN, HIGH);
|
|
}
|
|
|
|
if (measured_state_counter == constrain(measured_state_counter, LOWER_THRESHOLD, UPPER_THRESHOLD)) {
|
|
digitalWrite(YELLOW_LED_OUTPUT_PIN, HIGH);
|
|
} else {
|
|
digitalWrite(YELLOW_LED_OUTPUT_PIN, LOW);
|
|
}
|
|
}
|