diff --git a/source/client/nodemcu/statusclient/statusclient.ino b/source/client/nodemcu/statusclient/statusclient.ino index 4322c34..fe9175d 100644 --- a/source/client/nodemcu/statusclient/statusclient.ino +++ b/source/client/nodemcu/statusclient/statusclient.ino @@ -1,31 +1,46 @@ /* * file: statusclient.ino * desc: This file is part of the Krautspace Doorstatus project. It's the - * main file for a client, who deals with the input from a reed sensor and + * main file for a client, who deals with the input from a read sensor and * push these values to a server. The code is make to run on a NodeMCU with * ESP8266 chip. */ -#include -#include #include +#include +#include -#include "config.h" #include "certs.h" +#include "config.h" #include "credentials.h" -const int LED_PIN = 16; // D0 -const int REED_PIN = 5; // D1 +// cpp23 utility +namespace cpp23 { + template + constexpr std::underlying_type_t to_underlying(Enum e) noexcept { return static_cast>(e);} +} -typedef enum { - DOOR_CLOSED = 0, - DOOR_OPEN = 1 -} door_state; -door_state current_door_state = DOOR_CLOSED; +// defining some constants +enum : int { + LED_PIN = 16, // D0 + READ_PIN = 5 // D1 +}; -BearSSL::WiFiClientSecure client; +enum class door_state { + closed = 0, + open = 1 +}; -void blink_led(int blink_count, int delay_time) { +// defining some globals +static inline door_state current_door_state = door_state::closed; +constexpr static inline std::array state_str {{"0", "1"}}; + +// initializing +static inline BearSSL::X509List const ca_certs { CA_CERTS }; +static inline BearSSL::X509List const client_cert { CLIENT_CERT }; +static inline BearSSL::PrivateKey const client_key { CLIENT_KEY }; + +void blink_led(uint8_t blink_count, uint8_t delay_time) { /* * zur ausgabe von meldungen blinkt die interne led. * erfolgreichesmeldungen werden durch kurze blinkzeichen angezeigt, @@ -39,7 +54,7 @@ void blink_led(int blink_count, int delay_time) { * param 1: integer * param 2: integer */ - for(int i=0; i!= blink_count; ++i) { + for (; blink_count; --blink_count) { digitalWrite(LED_PIN, LOW); delay(delay_time); digitalWrite(LED_PIN, HIGH); @@ -53,58 +68,45 @@ void init_serial() { */ Serial.begin(BAUD_RATE); Serial.setDebugOutput(DEBUG); - Serial.println(); - Serial.println("[Srl] Serial interface initialized"); + Serial.println("\n[Srl] Serial interface initialized"); } void init_pins() { - /* - * set gpio for reed sensor and led + /* + * set gpio for read sensor and led */ - pinMode(REED_PIN, INPUT_PULLUP); + pinMode(READ_PIN, INPUT_PULLUP); pinMode(LED_PIN, OUTPUT); digitalWrite(LED_PIN, HIGH); - Serial.println("[Pin] LED and REED initialized"); + Serial.println("[Pin] LED and READ initialized"); } void init_wifi() { - /* - * Creates the ssl context. Turns wifi off and than into - * access point mode. - * TODO: is 'turn of' needed! - */ - ESP8266WiFiMulti wifi; - WiFi.mode(WIFI_OFF); - WiFi.mode(WIFI_STA); - wifi.addAP(SSID_1, PSK_1); - wifi.addAP(SSID_2, NULL); - Serial.println("[Wifi] Wifi initialized"); - wifi.run(); - if (WiFi.status() == WL_CONNECTED) { - Serial.print("[Wif] Connected to "); - Serial.println(WiFi.SSID()); - Serial.print("[Wifi] IP: "); - Serial.println(WiFi.localIP()); - set_clock(); - } else { - Serial.println("[Wifi] Error: Failed to connect"); + WiFi.begin(SSID, PSK); + Serial.println("[WiFi] Wifi initialized"); + + while (WiFi.status() != WL_CONNECTED) { + Serial.println("[WiFi] Error: Failed to connect"); blink_led(3, 500); - } + } + + Serial.printf("[WiFi] Connected to %s\n", WiFi.SSID()); + Serial.print("[WiFi] IP: "); + Serial.println(WiFi.localIP()); + + set_clock(); } door_state read_door_state() { /* - * die initialisierung des reed-pin mit pullup bewirkt, daß am pin + * die initialisierung des read-pin mit pullup bewirkt, daß am pin * 3,3 volt anliegen. die verbindung des pins mit GND sorgt dafür, * daß die spannung "abfließen" kann. dadurch hat der pin dann den * status 'low'. - * geschlossene tür -> reed geschlossen -> low - * geöffnete tür -> reed offen -> high + * geschlossene tür -> read geschlossen -> low + * geöffnete tür -> read offen -> high */ - if (digitalRead(REED_PIN) == HIGH) { - return DOOR_OPEN; - } - return DOOR_CLOSED; + return (digitalRead(READ_PIN) == HIGH) ? door_state::open : door_state::closed; } void set_clock() { @@ -115,58 +117,45 @@ void set_clock() { Serial.print("[Clock] Waiting for NTP time sync"); time_t now = time(nullptr); - while (now < 8 * 3600 * 2) { + for (; now < 16 * 3600; now = time(nullptr)) { // 16 hours delay(500); Serial.print("."); - now = time(nullptr); } Serial.println(""); struct tm timeinfo; gmtime_r(&now, &timeinfo); - Serial.print("[Clock] Current time: "); - Serial.println(asctime(&timeinfo)); + Serial.printf("[Clock] Current time: %s\n", asctime(&timeinfo)); } -int send_status(door_state state) { - +bool send_status(door_state state) { /* * Inits wifi (if needed) and send the status */ - char status[2] = ""; + char const* const status = state_str[cpp23::to_underlying(state)]; - if (state == DOOR_CLOSED) { - strncpy(status, "0", 1); - } else if (state == DOOR_OPEN) { - strncpy(status, "1", 1); - } else { - return 1; - } - - BearSSL::X509List server_cert(SERVER_CERT); - BearSSL::X509List client_cert(CLIENT_CERT); - BearSSL::PrivateKey client_key(CLIENT_KEY); - client.setTrustAnchors(&server_cert); + BearSSL::WiFiClientSecure client; + client.setTrustAnchors(&ca_certs); client.setClientRSACert(&client_cert, &client_key); + Serial.println("[Ctx] SSL Context initialized"); Serial.printf("[Send] Connect to %s:%i\n", SERVER_URL, SERVER_PORT); - client.connect(SERVER_URL, SERVER_PORT); - if (!client.connected()) { + + if (!client.connect(SERVER_URL, SERVER_PORT)) { Serial.println("[Send] Can't connect to server"); - Serial.print("[Send] SSL Error: "); - Serial.println(client.getLastSSLError()); - client.stop(); - return 1; - } else { - ESP.resetFreeContStack(); - uint32_t freeStackStart = ESP.getFreeContStack(); - Serial.println("[Send] Connection successful established"); - Serial.printf("[Send] Send status: %s\n", status); - client.write(status); + Serial.printf("[Send] SSL Error: %d\n", client.getLastSSLError()); client.stop(); + return false; } - return 0; -} + // ESP.resetFreeContStack(); + // uint32_t freeStackStart = ESP.getFreeContStack(); + Serial.println("[Send] Connection successful established"); + Serial.printf("[Send] Send status: %s\n", status); + client.write(status); + client.stop(); + + return true; +} void setup() { @@ -187,12 +176,13 @@ void loop() { if (new_door_state != current_door_state) { Serial.printf("[Loop] Status has changed to %i\n", new_door_state); blink_led(2, 100); - if (send_status(new_door_state) == 0) { + if (send_status(new_door_state)) { current_door_state = new_door_state; blink_led(5, 100); } else { blink_led(5, 500); } } + delay(FREQUENCY); }