doorstatus/documentation/arduino.tex

56 lines
1.5 KiB
TeX
Raw Normal View History

\documentclass[border=1mm]{standalone}
\usepackage{tikz}
\usetikzlibrary{positioning}
\usepackage{circuitikz}
\begin{document}
\begin{circuitikz}[
chip/.style = {
dipchip,
hide numbers,
no topmark,
external pins width=0,
num pins=14,
}]
\ctikzset{multipoles/dipchip/width=1.6}
% Arduino MKR1000
\node [chip] (MKR1000) {};
% align=center enables line breaks in node text
\node [align=center, rotate=90] at (MKR1000.center){Arduino\\MKR1000};
\draw (MKR1000.n) -- ++(0,1) node[vcc]{};
\draw (MKR1000.s) -- ++(0,-1) node[ground] {};
\node [right, font=\tiny] at (MKR1000.bpin 4) {0};
\node [left, font=\tiny] at (MKR1000.bpin 12) {VIN};
\node [left, font=\tiny] at (MKR1000.bpin 11) {A3};
\node [left, font=\tiny] at (MKR1000.bpin 10) {A4};
% Arduino MKR RGB Shield
\node[chip, right=of MKR1000] (RGB) {};
% align=center enables line breaks in node text
\node [align=center, rotate=90] at (RGB.center){Arduino\\MKR RGB Shield};
\draw (RGB.s) -- ++(0, -1) node[ground]{};
\node [right, font=\tiny] at (RGB.bpin 3) {VIN};
\node [right, font=\tiny] at (RGB.bpin 4) {A3};
\node [right, font=\tiny] at (RGB.bpin 5) {A4};
\draw (MKR1000.bpin 12) -- (RGB.bpin 3);
\draw (MKR1000.bpin 11) -- (RGB.bpin 4);
\draw (MKR1000.bpin 10) -- (RGB.bpin 5);
% Reed switch
\draw (MKR1000.bpin 4) -- ++(-1, 0) to [normal open switch, name=R] ++(0, -2.96) node[ground]{};
\node [rotate=90, above] at (R) {Reed Switch};
\end{circuitikz}
\end{document}